![]() ![]() Be sure the radio/battery is properly seated or fully connected and the charging indicator light is on. If it is a plug-in type of charger, the plug may not be fully inserted. If it is a drop-in or desktop charger with a pocket or tray, the radio and/or battery may be able to sit in the tray without actually touching the contacts. Sometimes a radio or battery seems like it's connected to the charger when it's not making contact at all. Reseat the radio or battery in the charger. If the charger still doesn't power on when connected to the other source, skip to Step 6.If the charger is plugged in and turned on, but there is no power, try it in another verified, working power source or outlet in another location and on a different circuit.If the charger is connected to an approved, working power source, proceed to Step 5.It's one of the easiest mistakes to make when charging a fleet of batteries and one of the simplest to resolve. ![]() Sound silly, doesn't it? Well, it isn't really, because it does happen. Check to be sure the charger is plugged in and turned on. If you are using the correct charger, proceed to Step 4.If the charger you are using does not match your specific model radio and battery, find the charger that does and skip to Step 8.Using the wrong charger can not only prevent your radio and/or battery from charging properly, it could damage your equipment. Yes, this happens too, particularly when using a mix of different radios from the same manufacturer, and it happens a lot more often than you might think. Verify you are using the correct battery charger. Make sure the battery is seated properly and the battery pack locks firmly in place when attaching it to the radio. Some radios require a tight fit with the battery and may seem attached when they are not fully locked in place. This includes the battery contacts on the radio, in the charger, and on the battery itself. Check the contacts and terminals for dirt, oils, corrosion, excessive wear or anything that can hamper a good, stable connection. It may seem improbable, but the stability of any power connection is limited by its weakest link. It may save you a lot of time, expense and frustration. Either way, before you start bashing batteries, cursing chargers or talking to tech support, try these simple troubleshooting steps to find out what is really going on. ![]() The other possibilities, well, they may require a different resolution. There are a number of possible reasons why the battery isn't charged, and believe it or not, a few of them are quite common causes that are surprisingly simple to resolve. But when you take it out of the charger and turn the radio on, either it doesn't power up at all or the battery dies out as soon as you press the PTT button to transmit. You put your two way radio or its battery pack in the charger at the end of the day, expecting it to be fully charged and ready to use again the next morning. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |